Product ID:EVAPORATOR REPAIR KIT, EP 538 B
MSDS Date:09/29/1989
FSC:8040
NIIN:00N019454
Kit Part:Y
MSDS Number: BLGQT

GEM PRODUCTS INC

12472 EDISON WAY
GARDEN GROVE, CA 92641

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 714-898-2788

Cage: 91714

GEM PRODUCTS INC

IRVING, TX 75061-8826 US

Telephone: 714-898-2788

Cage: 91714

EPOXY RESIN SYSTEM

SILICONE, DIOXIDE, AMORPHOUS (SILICA GEL)

CAS: 7631-86-9

Fraction By Weight: <05%

OSHA PEL 6 MG/M3 (TDUST)

ACGIH TLV: 10 MG/M3 (TDUST)

TALC (CONTAINING NO ASBESTOS)

CAS: 14807-96-6

RTECS: WW2710000

Fraction By Weight: <15%

OSHA PEL 2 MG/M3 RDUST

ACGIH TLV: 2 MG/M3 RDUST; 9192

SILICA, CRYSTALLINE - QUARTZ

CAS: 14808-60-7

RTECS: VV7330000

Fraction By Weight: <35%

OSHA PEL SEE TABLE Z3

ACGIH TLV: 0.1 MG/M3 RDUST;9293

PHENOL, 2,4,6-TRIS(DIMETHYLAMINO METHYL)

CAS: 90-72-2

RTECS: SN3500000

Fraction By Weight: <05%

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:MAY CAUSE SKIN IRRITATION AND POSSIBLE
ALLERGIC REACTIONS. PROLONGED AND REPEATED CONTACT MAY CAUSE
SENSITIZATION WHICH WILL RESULT IN ALLERGIC REACTIONS.
Explanation of Carcinogenicity:CRYSTALLINE SILICA: CLASS 2A (IARC).
Effects of Overexposure:SKIN RASH, IRRITATION
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:SKIN: WASH SKIN THORO WITH SOAP AND WATER, RUBBING ALCOHOL,
OR HAND CLEANER. DO NOT USE SOLV. REMOVE SOILED CLOTHING AND WASH
BEFORE REUSE. IF IRRIT PERSISTS OR INCRS, SEE PHYS. EYES: FLUSH W/
PLENTY OF WATER FOR AT LEAST 15 MINUTES. IF IRRIT PERSISTS OR
INCRS, SEE PHYS. INHAL: REMOVE FROM EXPOSURE. SUPPORT BREATHING
(GIVE ARTF RESP/O2). CALL MD IMMED . INGEST: CALL MD IMMEDIATELY .

Flash Point Method:COC
Flash Point:>215F,>102C
Extinguishing Media:DRY CHEMICAL, HALON FIRE EXTINGUISHER, WATER SPRAY,
FOAM OR FOG.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:DENSE SMOKE AND TOXIC GASSES MAY BE
LIBERATED.

Spill Release Procedures:WEAR PROTECTIVE CLOTHING, GLOVES, AND SAFETY
GLASSES. COVER WITH ABSORBENT MATERIAL, THEN SCRAPE UP AND TRANSFER
TO METAL CONTAINER. WIPE UP REMAINING RESIDUE WITH SOLVENTS,
OBSERVING SOLVENT FLAMMABI LITY CAUTIONS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP PRODUCT COOL IN ACCORDANCE WITH
LABEL INSTRUCTIONS.
Other Precautions:FOLLOW RECOMMENDED CURING SCHEDULE.

Respiratory Protection:NOT REQUIRED W/GOOD INDUSTRIAL VENTILATION. USE
NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN
.
Ventilation:LOCAL EXHAUST RECOMMENDED.
Protective Gloves:IMPERVIOUS PLASTIC/RUBBER GLOVES.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:AS NEEDED TO PROTECT SKIN AND CLOTHING.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
CNDTNS (POLYM): SURFACES TO BE BONDED. FAILURE TO OBSERVE CAUTIONS MAY
RESULT IN EXCESSIVE HEAT BUILD-UP WITH RELEASE OF TOXIC GASSES.

HCC:N1
Spec Gravity:1.62
Solubility in Water:SLIGHT
Appearance and Odor:WHITE, VISCOUS LIQUID.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG LEWIS OR MINERAL ACIDS.
Stability Condition to Avoid:SEE CONDITIONS TO AVOID (POLY).
Hazardous Decomposition Products:CO, NOX, ALDEHYDES, ACIDS AND
UNDETERMINED ORGANICS.
Conditions to Avoid Polymerization:AVOID MIXING RESIN & CURING AGENT IN
BATCHES >1 LB TOTAL. DO NOT HEAT MIXED ADHESIVE ABOVE 125 F UNLESS
CURING (SUP DAT)

Waste Disposal Methods:DISPOSE OF HAS HAZARDOUS WASTE ACCORDING TO
FEDERAL, STATE, AND LOCAL REGULATIONS. IF NOT REGULATED BY DOT,
DISPOSE OF AS ORM-E.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.